Skip to main content

Complete Configuration

Congratulations! You have almost finished configuring your wärmeleser. In this final step, you check that everything works correctly.

What happens now?​

After you have set all parameters, your wärmeleser will:

  • Use the connection to the heat meter
  • Read first data
  • Save the configuration in the cloud
  • Start regular data transmission

Checking the configuration​

1. Check LED status​

Look at the LED on the wärmeleser:

  • Green permanently lit = WiFi connected, data is being transmitted
  • Red permanently lit = WiFi not connected – see Troubleshooting

More on LED indicators: LED indicators

2. First data in the app​

  1. Go to the device overview in the app
  2. Select your wärmeleser
  3. You should see the first data (consumption, meter reading, temperature if available)

3. Next steps​

  • Usage – Understand consumption data and charts in the app
  • Maintenance – Perform software updates
  • Integrations – Integrate with Home Assistant

Next step​

Your wärmeleser is ready to use. Learn more about usage.